Readme.txt for Frohmage
============================================================Frohmage audio plug-in
Release notes
Copyright (c) 2001 - 2008 Ohm Force
All Rights Reserved
http://www.ohmforce.com/
Technical support : support@ohmforce.com (subject : Frohmage)
Other questions : contact@ohmforce.com
============================================================
Change log
----------
v1.51 (2008.12.05)
- RTAS Windows version installs factory native presets
- VST Windows version does not steal the keyboard anymore.
- AU version had a focus problem with Digital Performer.
- All Mac versions : open/save preset dialog sometimes failed
to find the factory presets folder.
v1.50 (2008.06.03)
- RTAS Windows version
- Mac Intel : performances improvment
- Mac : fixed potential crash during logs
- no MIDI output by default, since some hosts
auto-connect plug-ins via MIDI.
- AudioUnits : removed potential hassle during install.
- RTAS Mac : problem with unreadable presets fixed
- misc bug fixes
v1.48 (2007.10.15)
- VST Windows : Corrected an automation problem with Ableton Live.
v1.47 (2007.05.15)
- Corrected a memory leak in standalones.
- Some crash possibilities in case of host misconduct removed.
- Mac plug-ins now supports PowerPC and Intel based platforms
running Mac OS X 10.3.9 and later.
- Mac: Corrected 10.4.9 AU bug.
- Mac: Corrected GUI problems on VST & RTAS.
- Mac: VST support improved.
v1.46 (2007.03.13)
- Cubase 4 bug : tempo incorrectly reported by the GUI.
- Cubase 4 bug : touch mode automation behaves as
a latch mode automation.
- PC : additional 3Dnow optimizations.
v1.45 (2005.10.10)
- autobind is possible using NRPNs.
- un-bind is now possible. This is a new entry in the setup
menu, which also displays the current cc binded to the
selected parameter.
v1.44 (2005.05.13)
- DP crashes correction.
- AUValidation fixes (mono to stereo problems).
- Automation to host fix.
- Wave shaper correction.
v1.43 (2004.10.04)
- A terrible nasty bug was introduced in x.x2 version of the plugs.
Basically, to support a correct display in Logic controller view,
I miss the non linear mapping needed by most of our parameters.
New version correct the bug but did keep the old behavior so that
you can choose between old mode and new mode. This is needed when
you have a project with automation created with version x.x2 of
the plugs.
Mode switch is done via the setup menu. When linear automation is
checked, old mode is on, otherwise new mode is on.
Once the mode on, the plugin must be put off and put back on.
(loading the song again will do it too)
One should be able to load an old song with automation and play
it with both mode (old mode will show correct automation, new mode
will show weird automation but won't crash).
Also one should be able to load a new song with automation and
play it with both mode (new mode will show correct automation,
old mode will show weird automation but won't crash)
- Directly related to this, as the upcoming version of Logic support
custom values in the controller view, we are compliant to this now.
- Plugins pass AUVal 1b15.
- Correct AU version impl to be compliant with upcoming Logic plugin
cache.
- Corrected bypass property reply, which corrected a bug in Live4
- Corrected parameter name from value, which makes Live4 crash with
our 2004/09/08 beta release.
- Tempo synchronization for host since PT6.1
v1.42 (2004.03.19)
- A double mouse click on a knob sets it to its center
position.
- Discontinued support for MAS standard.
- Bug fix: graphic glitches when using Steinberg Cubase
and Propellerheads Reason via the ReWire protocol.
- Bug fix: AudioUnit automation has been fixed, and
works in latest Emagic Logic and MOTU Digital Performer.
- Bug fix: AudioUnit plugin can be put in any AU folder
supported by the host.
- Bug fix: on Mac, when saving a preset file, plugin will
not prompt twice for overwriting any more.
v1.40 (2003.05.13)
- MIDI on Mac stand-alone versions.
- Automatic configuration loading at startup (Setup menu)
v1.34 (2002.12.20)
- Bug fix: Stand-alone versions now work correctly on
Windows 98.
- Bug fix: MIDI working in Windows stand-alone versions.
- Bug fix: Macintosh versions could crash because of a
conflict in the preference files.
- Switches and discrete parameters are changed at the
begining of preset morphings instead of continuously
changing.
v1.33 (2002.12.13)
- Exists as stand-alone version for MacOS and Windows
v1.32 (2002.11.07)
- RTAS support for Mac
- Slight performance improvements
- Miscellaneous (potential) bugs fixed
- Mac versions : installer fixed
v1.31 (2002.07.26)
- Pc versions : Bug with Cubase SX fixed
- small bug in graphic interface fixed
v1.30 (2002.06.01)
- Slight denormal bug fixed.
- RPN and NRPN numbers are now correctly assigned.
- Added compatibility with graphical tablets and
Kensington mouse.
- New Midi autobind behaviour.
- Mac/PC VST2 versions : fixed display bug on Emagic
Logic.
- PC VST2 versions: fixed display bug in Ableton Live 1.5
- PC VST2 versions: Midi enabled plugins are now
compatible with logic 4.8x.
- Mac VST2 versions: MP Advanced bug fixed
- Mac VST2 versions: Bug with menus on some hosts
removed.
v1.20 (2001.12.20)
- MIDI support for controlling parameters in VST2
versions. All parameters are assignable to any MIDI CC
or (N)RPN.
- PC versions: can take any available MIDI port as
control input or output.
v1.10 (2001.09.26)
- Menu for easy access to the Ohm Force Frohmage pages on
the web.
- Mac systems: miscellaneous optimizations
v1.01 (2001.05.07)
- Bug fix in VST2 versions: preset activation can now
be recorded by automation system (if available on
host). Glitches have been removed when simultaneously
reading and recording an automation.
- MAS/MacOS, WinAmp/Windows and VST2/BeOS support.
- Fixed bug in graphic interface on Mac: sometimes
buttons didn't respond to mouse clicks.
v1.00
- Initial release
Installation
------------
We recommend you close all other applications before
installing the effect.
Step 1 - Selecting the installation location
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Windows VST versions:
Execute the installer. It will find on your hard drive the
applications where the plug-in can be installed. If several
applications are found, you will be asked to choose one.
If you want the plug-in to be installed for all those
applications, you will have to install it on each one.
If the installer could not find the VST plug-in directory,
it does not mean you do not have it; you will be asked to
locate the folder where you want to install your plug-in.
* Other versions :
Execute the installer. You will be asked to choose the
directory where you want to install your effect.
Step 2 - Running the program
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* Plug-in versions:
Please refer to your host application reference manual.
* Stand-alone versions:
Click on its icon in your Start/Program menu (Windows) or
where it has been installed (Macintosh).
* Winamp versions:
Go to the Option/Preference WinAmp menu. In the DSP/Effect
tab, select "Frohmage".
Uninstallation
--------------
First close every application potentially using the effect.
This is very important, as the uninstallation will fail if
the plug-in is still in use.
Windows specific
~~~~~~~~~~~~~~~~
Go in the Start/Program/Ohm Force menu, and run the
uninstaller from there.
Other systems
~~~~~~~~~~~~~
Locate the folder where the plug-in is installed and
delete the files manually.
Minimum system requirements
---------------------------
- SVGA card giving a resolution of at least 800x600.
- 64 MB of RAM
- 5 MB of free space on the hard disk
- Working sound card
- Mouse
Windows specific
~~~~~~~~~~~~~~~~
- Microsoft Windows 95, 98, ME, NT4, 2000, XP or later
- Pentium II-class CPU or later
- Host application compatible with the plug-in standard.
Macinthosh specific
~~~~~~~~~~~~~~~~~~~
- MacOS 9 or MacOS X, depending on the exact effect version
you chose.
- CarbonLib 1.5. See on Apple website how to upgrade.
- PPC G4 CPU or later
- Host application compatible with the plug-in standard.
BeOS PC specific
~~~~~~~~~~~~~~~~
- BeOS 5 or later
- Pentium II-class CPU or later
- VST-compatible host application.
Contact
-------
Web: http://www.ohmforce.com
Technical support: support@ohmforce.com
Other questions: contact@ohmforce.com
Phone: +33 1 47 97 10 12
Postal address: Ohm Force
110 rue du Faubourg Saint Denis
75010 Paris
France
We hope you're enjoy our products. Feel free to give us
feedback by reacting on our discussion forums, especially
for functional suggestions or criticism.
For technical problems, please mail to support@ohmforce.com
with "Frohmage" as subject. Specify which platform, version
and skin you are using. For bug report, please indicate as
many details as you can, especially on host application.
-- The Ohm Force team
© Ohm Force 2010
We analyze our traffic with Google Analytics